Introduction; Preface; Information On The Warranty - HAKO Hamster 800 V Operating Instructions Manual

Introduction

Preface

Introduction
Dear customer,
We hope that the excellent qualities of
the machine justify the faith you have
shown in us by purchasing the product.
Your safety, and that of others, is de-
pendent on your ability to control the
machine. Please read this translation of
the original manual before using the
machine for the first time, act according
to the information contained and keep it
in a safe place for future reference or
subsequent owners. In order to ensure
that you can work with the machine
safely, please read the chapter on safe-
ty before starting it up.
The operating manual contains all the
important information you need to oper-
ate, maintain and service the machine.
Sections of this operating manual which
are relevant to safety are marked by the
hazard label. If you have any questions
with regard to the machine or operating
manual, you can contact your Hako
service partner at any time.
2
We would like to emphasize that no le-
gal claims can be asserted in respect of
any work described in this manual. En-
sure only original spare parts are used
should any repairs be necessary. Only
such original spare parts warrant that
the equipment is reliably ready to use at
all times. We reserve the right to make
technical improvements.
Valid from: August 2010
Hako GmbH
D-23843 Bad Oldesloe
Hamburger Straße 209-239
Telephone +49 4531 806-0

Information on the warranty

As a fundamental rule, the regulations
in the purchase agreement apply.
There are no rights to claims for com-
pensation under the terms of warranty
when the damage is a result of failure to
observe the stipulations concerning
service and maintenance. Maintenance
work must be completed by an author-
ized Hako service center and confirmed
in the "maintenance logbook"; this
serves as proof of rights to claims under
the terms of warranty.
The following are excluded from the
terms of warranty: normal wear and tear
and damage caused by overuse, defec-
tive fuses, improper handling or unau-
thorized modifications. Claims under
the terms of warranty are also annulled
when damage occurs to the machine as
the result of the use of parts and acces-
sories not explicitly approved by us or to
failure to observe maintenance proce-
dures.