Instruction; Before Starting Up Each Day - HAKO Hamster 800 V Operating Instructions Manual

Starting Up

2.1.6 Instruction

Operators must receive instruction
before putting the machine into service.
Only technicians from your local,
authorized Hako dealer are allowed to
provide initial instruction on how to use
the machine. The manufacturing plant
notifies the dealer immediately after
delivering the machine and the dealer
will contact you to arrange a date for
providing the initial instruction.
18
2.2

Before starting up each day

Carry out the following checks before
starting the machine:
1. Check the parking space for signs of
leaks.
2. Only Hako Hamster 800 V: Check
the engine oil level with the dipstick
and refill, if necessary; refer to
Section 5.4.2.
3. Only Hako Hamster 800 V: Check
the fuel supply and refill fuel, if
necessary, refer to refer to
paragraph 2.1.2.
4. Only Hako Hamster 800 E: Check
the charge status of the batteries
and recharge, if necessary.
5. Check the fill level of the dirt hoppers
and empty them, if necessary.
6. Check the levels of wear on the
rotary brush and side brush.
7. Check the ergonomic position of the
handlebar and readjust it, if
necessary.