Disassembling The Air Filter; Cleaning The Air Filter; Installing The Air Filter - HAKO Hamster 800 V Operating Instructions Manual

Maintenance and Service

5.4.4 Disassembling the air filter

1. Open the hood.
2. Unscrew the fastening nut
(Fig. 14/5) securing the air filter
cover (Fig. 14/6).
3. Remove the air filter cover
(Fig. 14/6).
4. Unscrew the fastening nut
(Fig. 14/8) securing the air filter.
5. Pull the air filter (Fig. 14/7) from the
threaded pin (Fig. 14/9).

5.4.5 Cleaning the air filter

1. Disassemble the air filter,
refer to paragraph 5.4.4.
2. Beat the air filter lightly on a level,
solid surface.
3. If necessary, vacuum the air filter
carefully using a vacuum cleaner.
Do not damage the filter ribs!
4. If the air filter cannot be cleaned
sufficiently, replace the old air filter
with a new one.
40

5.4.6 Installing the air filter

1. Install the cleaned or new air filter
(Fig. 14/7) on the threaded pin
(Fig. 14/9).
2. Fix the air filter (Fig. 14/7) by
screwing the fastening nut
(Fig. 14/8) for the air filter on the
threaded pin (Fig. 14/9).
3. Replace the air filter cover
(Fig. 14/6).
4. Screw the fastening nut (Fig. 14/5)
for the air filter cover (Fig. 14/6) on
the threaded pin (Fig. 14/9).
5. Close the hood.