HAKO Hamster 800 V Operating Instructions Manual page 25

Operation
Hako Hamster 800 E
1 Key switch
2 Charge control indicator
3 Battery discharge status indicator
Key switch (Fig. 10/1)
The key switch serves to switch the
drive motor on and off and secure the
machine against unauthorized use.
Key switch positions
Position 0: Off
Position 1: On (engine on)
Charge control indicator (Fig. 10/2)
During the charging process, the
machine electronics indicates the
charge status via four green LEDs.
The Hako Hamster 800 E can
only be charged when the key
switch is in Position 0.
As the charge level increases, it is
indicated by the LEDs which light up
progressively from left to right.
1
Fig. 10
2
3
25