Clear Procedure - Avaya one-X 9601 Installation And Maintenance Manual

Clear Procedure

Sometimes, you might want to remove all administered values, user-specified data, and option
settings. Essentially, you want to return a deskphone to its initial "clean slate" or out of the box
condition. This is usually done following deskphone repair or when passing a deskphone to a
new, dedicated user when the LOGOUT option is not sufficient. For example, a new user is
assigned the same extension, but requires different permissions than the previous user.
The Clear option erases all administered data — static programming, file server and call server
programming, and user settings, and restores all such data to default values. This option does
not affect the software load itself. If you have upgraded the deskphone, the deskphone retains
the latest software. Once you have cleared a deskphone, you can administer it normally.
!
CAUTION:
This procedure erases all administered data, without any possibility of recovering
CAUTION:
the data.
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
Note:
the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Use the following procedure to clear the deskphone of its administrative, user-assigned, and
options values.
1. When you select CLEAR from the Admin Procedures Screen, the deskphone displays a
confirmation screen.
2. If you do not want to clear all values, press No to terminate the procedure and retain the
current values. Press Yes to clear all values to their initial default values.
The deskphone displays the following text:
Clearing values.
The deskphone is cleared to its "out of the box" state, resetting the following values to their
factory defaults:
The 802.1X identity and password.
●
All system values and system initialization values.
●
User options, parameter settings, identifiers and password.
●
Any user data like Contact Lists or Call Logs are deleted.
●
After clearing the values, the deskphone resets.
Clear Procedure
Issue 1 December 2010 37