Emerson SmartCabinet User Manual page 80

76 Chapter 6 Web Page Of MSC-C
2. Install/Uninstall Device Type
Click the Device Management submenu under the Device Options menu, and then click the Install/Uninstall
Device Type tab, the page shown in Figure 6-45 pops up.
Click the Browse... button to download configure package (file format of .iru) from local content, and click the Install
button to install the new device type.
Note
The device type number supported by the system is related to the system remaining memory and the size of driver configuration
package, but the number cannot exceed 64.
The page displays the installed device type information in the lower right part. Click the Uninstall button, the
confirming dialog box pops up, as shown in Figure 6-46.
Click OK, the dialog box of Security authentication pops up, as shown in Figure 6-16, type the login password of
current user, and click OK to uninstall the corresponding equipment type.
Note
1. While installing device type, if the device type exists and the device driver has a higher version than the driver to be added, it
cannot be installed repeatedly;
2. If the installation pack has no version information, or the version information does not match the software version, the device
type cannot be installed.
2. If some device uses the device type, the Uninstall button becomes gray, displaying Using, and the device type cannot be
uninstalled.
3. Asset Inventory
Click the Device Management submenu under the Device Options menu, and then click the Asset Inventory tab,
the page shown in Figure 6-47 pops up.
Figure 6-45 Install/Uninstall Device Type
Figure 6-46 Confirming dialog box
SmartCabinet Integrated Solution User Manual