Chapter 3 Installation; Installing The Cabinet; Installing Ac Components - Emerson SmartCabinet User Manual

Hide thumbs

Table Of Contents

Table of Contents

This chapter introduces the installation and commissioning of the SmartCabinet. Ensure that all the installation tools

and fittings are at hand before installation, and perform operation according to the content in this chapter.

The flow chart of installation is shown in Figure 3-1.

3.1 Installing The Cabinet

1. Place the cabinet on the prearranged position, and use a movable wrench to loosen the fixing nuts on the four feet

bolts on the cabinet, as shown in Figure 3-2.

2. Rotate the hexagon head bolt on the bottom of the feet clockwise or counter clockwise till the feet rise or drop to an

optimal position, and use a gradienter to ensure that the cabinet is horizontal.

3. Tighten the fixing nuts (shown in Figure 3-2) on the feet bolts counter clockwise, and the cabinet adjustment is

completed.

3.2 Installing AC Components

The AC components comprise AC indoor unit, and AC outdoor unit. When delivery, the AC indoor unit has been

installed in the cabinet before delivery, the AC outdoor unit is placed inside the cabinet and delivered with the cabinet.

In field, you need to place the AC outdoor unit reasonably, connect copper pipes between the AC indoor unit and

outdoor unit, vacuum and connect cables.