Emerson SmartCabinet User Manual page 72

68 Chapter 6 Web Page Of MSC-C
Note
If the SMS Modem is connected through USB port, you need to modify the jumper locations by referring to Table 3-7.
RDU Voice Notification System Setting
1) Type the server IP address in the Server IP field;
2) Type the port number in the Port field, and the default is 13393;
3) Select whether to Receive Alarm Restore msg;
4) Click the Save button to save the voice notification system setting.
Email Server Configuration
1) Type the server IP address or domain name in the Email Server field;
2) Type the Server Port, Email User, Email Password and Sender Email Address in the corresponding fields;
3) Click the Save button to save the configuration of current user's Email server.
4) Click the Default button to restore default setting.
Note
1. The Server Port is 25 by default. When SSL is chosen, the Server Port will become 465 automatically;
2. The Email User is RDU-A by default;
3. When using SSL, you need to ensure that the Email server supports SSL function.
3. Scheduled Notification Configuration
Click the Alarm Notification submenu under the Alarm Management menu, and then click the Scheduled
Notification Configuration tab, the page shown in Figure 6-31 pops up.
Note
1. Scheduled notification configuration must be used together with alarm notification configuration; otherwise, you cannot select
User Name, Notification by and Language type;
2. For scheduled notification configuration, the notification method 'Phone' is not supported;
3. The scheduled notification means sending the running state of the MSC-C system (normal or alarm) to the user.
1) First of all, on the Alarm Notification Configuration page, complete and save the setting of User, Notification
by and Language type.
2) On the Scheduled Notification Configuration page, set the Notification Enabled Period (setting range: 8:00 ~
20:00), Notification Scheduled Cycle (default: Hour), Interval of Notification (default: 1) and Send Time Setting
(default: start time).
3) Click the Save button to save the system notification configuration.
Figure 6-31 Scheduled notification configuration
SmartCabinet Integrated Solution User Manual