Emerson SmartCabinet User Manual page 20

16 Chapter 3 Installation
If there are multiple outdoor units that need to be placed with one above the other, follow the method shown in
Figure 3-7 to install them.
2. Installing the outdoor unit on top of the cabinet
There is a special method for installing outdoor unit higher than indoor unit, that is, installing the outdoor unit on top of
the cabinet. The detailed installing procedures are as follows:
1) Life or carry the outdoor unit removed from the cabinet onto top of the cabinet. See Figure 3-8 for the installing
direction of AC outdoor unit.
2) Adjust the placing position of the AC to align the AC foot stands with the corresponding screw holes on top of the
cabinet, and then place metal press pieces on the foot stands, at last, use four screws to fix the AC outdoor unit on
the top plate of the cabinet, as shown in Figure 3-8.
4m
Note:
1. Use 5# angle iron for bracket, when
two units are installed with one above
the other.
2. Use 6.5# channel steel for bracket, when
three units are installed with one above the
other.
Figure 3-7 Installing multiple outdoor units with one above the other
A
Front door
Screw
(4 pcs)
Metal press
piece (4 pcs)
Figure 3-8 Installing outdoor unit on top of the cabinet
SmartCabinet Integrated Solution User Manual
Out-
door
unit
Airflow
Out-
Airflow door
unit
50mm
Min. 50mm
Base
Outdoor unit base
Outflow
direction
of the fan
A amplified
0.5m
Bracket
50mm