Emerson SmartCabinet User Manual page 52

48 Chapter 5 Operation On Display Panel
Figure 5-20 IP display
Click the input box, after login by using admin, the setting input box pops up. Type the IP address in character string
format, and click the Enter button, the page shown in Figure 5-21 pops up. Click the Set button, the IP address will
be sent to the control system for setting new IP.
Figure 5-21 IP setting
On the page shown in Figure 5-21, you can configure the network parameters of the MSC-C background monitoring
unit, such as IP Address, Subnet Mask and Default Gateway, click the Set button to make the parameters effect.
Note
After modifying the IP address, if you want to visit the MSC-C through network mode, please use the new IP address for login.
Language
Click the Language submenu under the Setting menu, the page shown in Figure 5-22 pops up. You can click the
English button to select English display.
SmartCabinet Integrated Solution User Manual