Emerson SmartCabinet User Manual page 68

64 Chapter 6 Web Page Of MSC-C
Click the Add Schedule Shutdown button, the task will be successfully added. As shown in Figure 6-24, a new task
has been added in the schedule shutdown task list. The tasks in the task list will be executed automatically according
to their Enable/Disable status.
The descriptions about the MSC-C schedule shutdown function are as follows:
1. When the Open Mode is set to 'Do Not Open Device' or 'Open Device At Once', the Open Time cannot be set, and
it is displayed as '--';
2. The format of Shut Down Time changes with different options of ShutDown Mode automatically.
Note
1. The MSC-C can support up to ten shutdown tasks.
2. Only when 'Enable Device' is set for Field can the schedule shutdown task be enabled.
Server Shutdown
Click Server Shutdown submenu under the Safe Shutdown menu, the Server Shutdown page will pop up, as
shown in Figure 6-25.
On the Server Shutdown page, you can add and delete server shutdown task.
The procedures for adding a server shutdown task are as follows:
1. Select a UPS from the drop-down box of UPS Name;
2. In the Server IP field, type the IP address of the server to be closed;
3. Click the Add button, the server shutdown task is added.
Note
If you want to use the server shutdown function, please install 'Emerson network shutdown' software in the server.
The procedures for deleting a server shutdown task are as follows:
Select the task to be deleted in the server shutdown task list, and click the Delete button to finish the operation.
Figure 6-24 Schedule shutdown task list
Figure 6-25 Server Shutdown page
SmartCabinet Integrated Solution User Manual