Log In Msc-C; Authorizing Boot-Strap - Emerson SmartCabinet User Manual

56 Chapter 6 Web Page Of MSC-C

6.2 Log In MSC-C

6.2.1 Authorizing Boot-Strap

1. When logging in MSC-C for the first time, open the IE browser, and enter the IP address of the MSC-C (the default
IP is 192.168.0.252) in the address box, the authorizing boot-strap page will appear, as shown in Figure 6-9. If the
authorizing boot-strap page does not appear, refer to Q5 in FAQ in 7.2.1 MSC-C Maintenance.
2. Call the customer service hotline of Emerson Network Power Co., Ltd.: 400-887-6510, tell the code to the customer
service personnel, and you will get the password.
3. Type the gotten password in the textbox of Password, and then click OK. If the password is correct, the system
will jump to the login page automatically (see Figure 6-10).
For overseas market, there is no need of authorizing boot-strap. The initial boot-strap page is shown in Figure 6-10.
Figure 6-8 Adding trusted sites
Figure 6-9 Authorizing boot-strap page
SmartCabinet Integrated Solution User Manual