Disassemble The Power Switch; Disassemble Top Cover - SNBC BTP-R880NPI Service Manual

4.2.4 Disassemble the power switch

4.2.5 Disassemble top cover

1.
2.
Follow the arrows to hold the power switch flat spring, and
remove the power switch from the main control board
cover.
Disassemble the two ∮ 3"E" rings which fix the top cover
shaft and take the torque spring and the shaft out.
Remove the top cover bracket from the mechanism and
finish the disassembly of the top cover bracket
- 14 -
BTP-R880NPII Service Manual