Installation; Unpacking; Printer Installation; Connecting The Power Adapter - SNBC BTP-R180II User Manual

4 Installation

4.1 Unpacking

Check whether all items, which are listed on the packing list, are present and in a good condition. If any
item is damaged or missing, please contact your dealer.

4.2 Printer installation

The BTP-R180II can be installed in two positions: horizontally on a table or vertically on a wall.

4.3 Connecting the Power Adapter

1) Confirm the power switch is turned off.
2) Insert the power cord into the power socket on the back of the printer.
Caution:
 Use only the manufacturers supplied power adapter or other equal
model.
 When connecting or disconnecting the cable connector of the power
adapter, always hold the connector but not the cable.
 Do not pull on the power adapter cord, otherwise the cord may be
damaged or broken, causing a risk of fire or electric shock.
 Do not place the Power adapter cord near a heating device; otherwise, the cover of the cord may melt,
1. Horizontally on a table
2. Vertically on a wall
- 8 -
BTP-R180II User's Manual