Liebert 130 kVA User Manual page 62

User Manual
Hipulse - Single Phase '1+N' UPS System
>INVERTER OFF >INVERTER OFF
BYPASS BYPASS
RECTIFIER RECTIFIER
RECTIFIER RECTIFIER
ROTATE ROTATE START START
EXIT EXIT
INVERTER INVERTER
The OFF selection will be highlighted, using the UP
arrow key, rotate between the selections offered (in
this case it will be ON or OFF) select ON. Press the
ENTER key to execute your order.
After approximately 20 seconds, the Module Mimic
will change so that the Load on Inverter (5) will light
steady green and the Load on Bypass (6) will
extinguish.
6a. Return the Display window to normal by
repeatedly pressing ESCAPE key back through the
various
displayed.
ECOMODE:
5b. Ensure BYPASS is selected by the cursor and
< <
press the ENTER key:
ON ON
The OFF selection will be highlighted, using the UP
ON ON
arrow key, rotate between the selection offered (in
MAN MAN
this case it will be On or OFF) Select ON. Press the
ENTER key to execute your order.
The Module Mimic LED's will change: Load on
ESC ESC
Mains (6) will come on and Load on Inverter (5) will
ON ON go out.
6b. Return the Display window to normal by
repeatedly pressing ESCAPE key back through the
various
displayed.
The UPS is operating in ECOMODE with
42
windows until the
The UPS is operating normally with its
Inverter supplying the load.
windows until the
Bypass Mains supplying the load.
130 kVA - 110V
default screen is
default screen is