Advertisement
Advertisement
Table of Contents
Related Manuals for Liebert Liebert PS
Summary of Contents for Liebert Liebert PS
-
Page 1: User Manual
Power Protection for Business-Critical Continuity Liebert PS UPS User Manual... - Page 2 V2.6 Revision date: May 2006 Emerson Network Power provides customers with technical support. Users may contact the nearest Emerson local sales office or service center. While every precaution has been taken to ensure accuracy and completeness in this manual, Emerson Network Power assumes no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
-
Page 3: Safety Instructions
The UPS must be serviced by an authorized representative of Emerson Network Power. Failure to do so could result in personnel safety risk, equipment malfunction and invalidation of warranty. • The Liebert PS has been designed for Commercial/Industrial use only, and is not recommended for use in life support applications. - Page 4 Liebert PS UPS Installation and User Manual • In the event of Emergency press 'OFF' button and disconnect the power cord from AC Power supply to properly disable the UPS • Do not plug UPS input to its own output. Do not attach power-strip or surge suppressor to the UPS Operation •...
-
Page 5: System Description
Liebert PS UPS Installation and User Manual 1. System Description 1a. Front panel 1. Power Switch 2. UPS status Indicator AC Mode: Green lighting Battery Mode: Green flashing 3. Fault LED: Red flashing 1b. Back Panel Output receptacles AC Input with input fuse Page 2 V2.6... -
Page 6: Installation And Operation
Liebert PS UPS Installation and User Manual 2. Installation and operation 2.1 Inspection Remove the UPS from its packaging and inspect it for damage that may have occurred during shipping. If any damage is discovered, repack the unit and return it to the place of purchase. - Page 7 Liebert PS UPS Installation and User Manual 2.4 Computer Connection Plug the UPS into a 2-pole, 3-wire grounded receptacle. Then connect one computer-related device into each of the power receptacles supplied on the back of the UPS. 2.5 Turn On/Off...
-
Page 8: Troubleshooting
Liebert PS UPS Installation and User Manual 3. Trouble Shooting Symptom Possible Cause Remedy No LED display 1. Missing battery. 1. Charge battery up to 8 hours. on the front 2. Battery defect. 2. Replace with the same type of panel. -
Page 9: Specification
Liebert PS UPS Installation and User Manual 4. Specification MODEL Liebert PS 400-AS Liebert PS 600-AS PS 400VA UPS 230V PS 600VA UPS 230V DESCRIPTION Off Line - Asia Off Line - Asia CAPACITY VA/W 400VA/200W 600VA/300W INPUT Voltage 220/230/240VAC Voltage Range... - Page 10 Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Power Precision Cooling Site Monitoring and Services Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. 2005 Emerson Electric Co.