Technical Characteristics; Technical Data - Compak FRESH ON DEMAND Instruction Manual

5. TECHNICAL CHARACTERISTICS

5.1. Usage
The coffee grinders are intended for use on commercial premises and facilities where
ground coffee is required, or in small stores that sell coffee. The grinder must only be
used to grind coffee beans. Any use other than this will be considered improper and
dangerous.
NOTE: The manufacturer will not be held responsible for any damages resulting from
improper use of the equipment, or for not following the safety measures as outlined
below.

5.2. Technical data

Model
Electrical
F10
power
MASTER
CONIC
Spin
OD
speed
Electrical
power
F10
CONIC
OD
Spin
speed
Electrical
power
F8
OD
Spin
speed
4
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 19/07/2016 | K06315
100 V 100 V 110 V
50 Hz 60 Hz 60 Hz
850 1,000 935
326 378 325
890 960 810
335 388 400
750 810 860
1,250 1,540 1,600
220 V 230 V 240 V
60 Hz 50 Hz 50 Hz
930 950 975
388 340 345
810 800 850
375 325 331
735 730 840
1,600 1,325 1,330
400 V ψ 208 V ψ
50Hz 60 Hz
780 840 (W)
350 390 rpm
780 840 (W)
350 390 rpm
(W)
rpm