Identification; Technical Characteristics - Compak K3 User Manual

4.

IDENTIFICATION

The technical characteristics
plate is indelibly marked with
the following information:
NOTE: The manufacturer reserves
the right to change the machine
components, according to the
requirements of each market, and
also for technological advances.
Model
Electrical Power
K3
Rotational Velocity
Electrical Power
K6
Rotational Velocity
Ø Flat Burrs
K3
58
K6 64
mm
Dose Capacity
K3 300 0,66
K6 300 0,66
g lb
* Production based on a medium roast coffee and Espresso grinding point.
K09652H00 | PROC-CAL/002/03 USER MANUAL | V. 29/06/20023
100 V 100 V
50 Hz 60 Hz
200 200
1320 1620
230 230
1320 1620
Production 50 Hz*
2,3 3,7
2,5 6
in Kg/h
Lever Position Net weight
Right or Left 6.8
Right or Left 13,8
Side Kg
5.
TECH. CHARACTERISTICS
5.1 SCOPE
The coffee grinders are intended for
commercial applications where ground
coffee must be used, or in small shops
selling coffee, but not for continuous mass
production of food.
This grinder should only be
used to grind coffee beans.
Any other use is considered
improper and dangerous.
NOTE: The manufacturer is not
liable for damage to persons, goods
or the machine itself, if the safety
regulations given in this manual are
not followed, or the machine is used
incorrectly.
5.2. TECHNICAL DATA
110 V 220 V 230 V
60 Hz 60 Hz 50 Hz
175 210 220
1640 1700 1380
245 375 375
1100 1700 1380
8,2
13
lb/h Kg/h
Height x Width x Depth
15,7 660x230x384
30,4 660x230x384
lb mm
240 V
50 Hz
255 W
1400 rpm
375 W
1400 rpm
Production 60 Hz*
4,3 9,5
7 15
lb/h
26x9, 1 x15, 1
26x9, 1 x15, 1
in
7