Adjustment/Maintenance; Copy Density Adjustment - Kyocera KM-2560 Advanced Operation Manual

Adjustment/Maintenance

Copy Density Adjustment

ADVANCED OPERATION GUIDE
Adjust printing quality and conduct machine maintenance.
• Copy Density Adjustment ...6-63
• Print Density ...6-64
• Send/Box Density Adjust ...6-64
• Auto Drum Refresh ...6-65
• Drum Refresh ...6-66
• Correcting Fine Black Lines ...6-67
• Display Brightness ...6-68
• Silent Mode ...6-68
• Auto Color Correction...6-69
• System Initialization ...6-70
• Clean the Main Charger ...6-70
NOTE:
If user login is enabled, you can only change the settings by
logging in with administrator privileges.
Adjust copy density. Adjustment can be made in 7 levels both in auto and
manual density modes.
Use the procedure below to adjust the copy density.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Next] of Copy Density
Adjustment.
3
Press [Change] of Auto for auto density mode or of Manual for manual
density mode.
4
Press [-3] - [+3]
(Lighter-Darker) to
adjust density.
5
Press [OK].
Adjustment /Maintenance - Manual
Adjust the default copy density for manual mode .
Lighter Normal
-3 -2 -1 0
Status
System Menu
Darker
+1 +2 +3
Cancel OK
10/10/2007 10 :10
6-63
6