Kyocera KM-2560 Advanced Operation Manual page 264

Management
7-6
1
Log in as a user with administrator rights.
2
Press the System Menu key.
3
Press [User Login/Job Accounting].
4
If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
5
Press [Next] of User Login Setting, [Register/Edit] of Local User List, and
then [Add].
6
Press [Change] of
User Name.
7
Enter the user name and press [OK].
NOTE:
Refer to the Operation Guide for details on entering characters.
8
Enter the login user name and E-mail address following 6 and 7 above.
9
Press [Change] of Login Password and then [Password].
10
Enter the login password and press [OK].
11
Press [Confirm Password].
12
Enter the same login password to confirm and press [OK].
13
Press [Change] of Access Level.
" "
3060 .
User:**
User Name: Change
User0099
Detail
Login User Name:
0099
Access Level : Change
User
E-mail Address:
Change
abcd@efg.com
Status
ADVANCED OPERATION GUIDE
Change
Login Password
********
Account Name: Detail
Account02
Cancel Register
10/10/2007 10 :10