Kyocera KM-2560 Advanced Operation Manual page 36

Copying Functions
1-22
3
Press [2 in 1] or [4 in
1], and choose the
page layout of
Layout.
4
Press [Border Line] to choose the type of the lines to indicate page
boundaries. Press [OK].
5
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
6
Press [OK].
7
Place the originals and press the Start key.
If the original is placed on the platen, replace the original and press the
Start key.
After scanning all originals, press [Scan finish] to start copying.
Ready to copy.
Combine
Off
2 in 1
Press [ OK] to display
the image.
4 in 1
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Copies
Layout
Right then Left then
Down Down
None
Border Line
Top Edge Top
Down then Down then
Right Left
Original
Orientation
Cancel OK
10/10/2007
1
10 :10