Pdf/Tiff/Jpeg Image - Kyocera KM-2560 Advanced Operation Manual

System Menu
6-34
Use the procedure below to set the default EcoPrint setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of EcoPrint.
3
Select [Off] or [On]
for the default.
4
Press [OK].

PDF/TIFF/JPEG Image

Select the default PDF/TIFF/JPEG file quality. Five options are available
from 1 Low Quality (High Comp.) to 5 High Quality (Low Comp.).
NOTE:
Higher quality will make the stored files larger.
Refer to page 2-14 for file formats.
Use the procedure below to select the default file quality setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Next] of Function Defaults. Press [ ] twice
and then [Change] of PDF/TIFF/JPEG Image.
3
Select the default
image quality from [1
Low Quality (High
Comp.)] to [5 High
Quality (Low
Comp.)].
4
Press [OK].
Common Settings - EcoPrint
Select the default EcoPrint setting .
Off
Status
Common Settings - PDF /TIFF/JPEG Image
Set the default PDF /TIFF/JPEG
quality level.
Higher quality will make the stored files larger.
Low Quality
1 2
Status
ADVANCED OPERATION GUIDE
On
Cancel OK
10/10/2007
High Quality
3 4 5
Cancel OK
10/10/2007
10 :10
10 :10