Kyocera KM-2560 Advanced Operation Manual page 263

ADVANCED OPERATION GUIDE
Auto Logout
Logout is automatically executed in the following cases:
• When the Power key is pressed to enter the sleep mode
• When auto sleep is activated
• When auto reset is activated
Adding a User
This adds a new user. You can add Up to 1,000 users (including the default
login user name). The table below explains the user information to be
registered.
Item
User Name*
Login User
Name*
Login
Password*
Access Level*
Account Name
E-mail Address
* Mandatory at user registration.
NOTE:
By default, one default user with administrator rights is already
stored. This user's properties are:
User Name:
Login user name: 3060
Login Password: 3060
Access Level:
It is recommended to periodically change the user name, login user name
and login password regularly for your security.
Use the procedure below to register a new user.
Description
Enter the name displayed on the user list (up to 32
characters).
Enter the login user name to log in (up to 64
characters). The same login user name cannot be
registered.
Enter the password to log in (up to 64 characters).
Select User or Administrator for user access
privileges.
Add an account where the user belongs. The user,
who registered his/her account name, can log in
without entering the account ID. Refer to Job
Accounting on page 7-11.
The user can register his/her E-mail address. The
registered address will be automatically selected
for subsequent operations that need any E-mail
function.
Admin
Administrator
Management
7
7-5