Kyocera KM-2560 Advanced Operation Manual page 194

System Menu
6-26
Density
Set the default density. The available default settings are shown below.
NOTE:
You cannot specify the density if you have selected [Full Color] in
Color Selection.
Item
Manual (Normal 0)
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Density.
3
Select the default
density.
4
Press [OK].
Zoom
Select the enlarged/reduced default when paper size/sending size
changed after the originals set. The available default settings are shown
below.
Item
100%
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
Description
Set to (Normal 0) in the Manual density.
Set to Auto density.
Common Settings - Density
Select the default Density.
Manual
(Normal 0)
Status
Description
Copy (send/save) at actual size (100%).
Automatically reduce or enlarge the
originals to match paper size/ sending size.
ADVANCED OPERATION GUIDE
Auto
Cancel OK
10/10/2007 10 :10