Sending Size Selection - Kyocera KM-2560 Advanced Operation Manual

Sending Functions

Sending Size Selection

2-4
Select the sending size (the size of image to be sent).
The table below lists the sizes.
Item
Standard
Sizes 1
Standard
Sizes 2
Others
Relationship between Original Size, Sending Size, and Zoom
Original Size (page 2-2), Sending Size, and Zoom (page 2-6) are related
to each other. Refer to the following table.
Original Size and the size you
wish to send as are
Original Size
Sending Size
Zoom
NOTE:
When you select Sending Size that is different from Original Size,
and select the Zoom [100%], you can send the image as the actual size
(No Zoom).
Use the procedure below to select the size for transmission when sending
scanned images.
1
Place the originals on the platen.
2
Press the Send Key.
3
Press [Type of Original/Transmission] and then [Sending Size].
Detail
Select from Same Inch models: Same as Original Size,
as Original Size or Ledger, Legal, Letter, Statement,
Standard Size. 8.5×13.5", Oficio II, 11×15"
Metric models: Same as Original Size,
A3, B4, A4, B5, A5, B6, A6, Folio
Select from Inch models: A3, B4, A4, B5, A5,
standard size B6, A6, Folio, 8K, 16K
except Standard
Metric models: Ledger, Legal,
Sizes 1.
Letter, Statement, 8.5×13.5",
Oficio II, 11×15", 8K, 16K
Select from Hagaki, Oufuku Hagaki
Hagaki.
Specify as
necessary
Select [Same as
Original]
Select [100%]
(or [Auto])
Size
the same different
Specify as
necessary
Select the
required size
Select [Auto]
ADVANCED OPERATION GUIDE