Table of Contents
Advertisement
TCP Sync Flood
ICMP Flood
3.5.2 Client Filtering
You can filter Internet access for local clients based on IP addresses, application types, (i.e.,HTTP
port), and time of day.
Parameter
Enable Client Filter
IP
Port
Type
Block Time
Day
Time
Comment
Enable
Protection the router from Sync Flood attack.
Protection the router from ICMP Flood Packet attack.
Description
Select to enable "Client Filtering" function.
Enter the IP address range that you wish to apply this
rule.
You can assign the specific port ranges. The router will
block clients from accessing Internet services that use
these ports.
This allows you to select UDP, TCP or both protocols
that you want to block.
Select <Always> router will block the access forever.
Select <Block> router will block the access according to
the time schedule.
Select a certain days in the week to block the access.
Select a certain time in a day that you want to block.
The description of this setting.
To enable the rule of Client Filtering
59
Advertisement
Table of Contents
