Table of Contents
Advertisement
Step 2) WAN Settings
In this section you have to select one of these types of connections that you will be using to connect
your XRT-401F's WAN port to your ISP (see screen below).
Different ISP's require different methods of connecting to the Internet, please check
Note
with your ISP as to the type of connection it requires.
Parameter
Dynamic IP
Static IP
PPPoE
PPTP
L2TP
Dual Acces
Click on one of the WAN types and then proceed to the manual's relevant sub-section (
2.3
2.4 or 2.5
,
). Click on
Your ISP will automatically give you an IP address.
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over Ethernet
(PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
Layer 2 Tunneling Protocol is a common connection method used in
xDSL connections.
This mode only active for Russia ISP that support dual layer Access
to the Internet.
Back
to return to the previous screen.
18
Description
2.1
2.2
,
,
Advertisement
Table of Contents
