System Settings - Planet XRT-401F User Manual

3.1.2 System Settings

The system screen allows you to specify a time zone, Host Name, Function mode, and enable or
disable NAT function of XRT-401F.
Parameter
Host Name
Set Time Zone
Daylight Saving
Host Name
NAPT
Function Mode
Optional. You can specify a Host name for XRT-401F.
Select the time zone of the country where you are currently
are. The router will set its time based on your selection.
The XRT-401F can also take Daylight savings into
account. If you wish to use this function, you must select
the enable box to enable your daylight saving configuration.
Optional. You can specify a Host name for XRT-401F.
Select to enable or disable NAT / NAPT function.
The XRT-401F supports two mode for your application, select
the Router mode to act as a Router / Gateway which provides
the firewall function to protect your private network. To select
the Bridge mode, the XRT-401F will act as a pure 5-Port
Ethernet Switch.
The default mode is Router.
28
Description