Table of Contents
Advertisement
3.2.1 Dynamic IP
Choose the Dynamic IP selection if you're ISP will automatically give you an IP address. Some
ISP's may also require that you fill in additional information such as MAC address (see chapter 2
Dynamic IP
"
" for more detail).
Parameter
MTU
Static DNS Server
Primary DNS Address
Secondary DNS
Address
MAC Cloning
MAC Address
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you do not
wish to set a maximum packet size. (The default settings is
1500)
Select "Enabled" to allow configuring DNS manually.
This is the ISP's DNS server IP address that they gave you; or
you can specify your own preferred DNS server IP address
This is optional. You can enter another DNS server's IP address
as a backup. The secondary DNS will be used if the above DNS
fail.
If you want to clone your PC's MAC address to XRT-401F, you
must enable it first.
Your ISP may require a particular MAC address in order for you
to connect to the Internet. This MAC address is the PC's MAC
33
Description
Advertisement
Table of Contents
