Table of Contents
Advertisement
3.4.2 Port Triggering
Some applications require multiple connections, such as Internet games, video conferencing,
Internet telephony and others. In this section you can configure the router to support multiple
connections for these types of applications.
Parameter
Enable
Trigger Port
Trigger Type
Public Port
Public Type
Comment
Example: Special Applications
If you need to run applications that require multiple connections, then specify the port (outbound)
normally associated with that application in the "Trigger Port" field. Then select the protocol type
(TCP or UDP) and enter the public ports associated with the trigger port to open them up for
inbound traffic.
To enable the rule of Port Triggering.
This is the out going (Outbound) range of port numbers for this
particular application
Select whether the outbound port protocol is "TCP", "UDP" or
both.
Enter the In-coming (Inbound) port or port range for this type of
application (e.g. 2300-2400, 47624)
Note
: Individual port numbers are separated by a comma
(e.g. 47624, 5775, 6541 etc.). To input a port range use a "dash"
to separate the two port number range (e.g. 2300-2400)
Select the Inbound port protocol type: "TCP", "UDP" or both
The description of this setting.
52
Description
Advertisement
Table of Contents
