Table of Contents
Advertisement
Static IP
L2TP Settings
L2TP Account
L2TP Password
Retype Password
L2TP Server
MTU
Maximum Idle Time
Connection Mode
a specific MAC address.
MAC Address
Your ISP may require a particular MAC address in order for
you to connect to the Internet. This MAC address is the PC's
MAC address that your ISP had originally connected your
Internet connection to. Type in this MAC address in this section
Clone MAC Address"
or use the "
MAC address with the MAC address of that PC.
The ISP gives you a static IP to be used to connect to the
PPTP server. You must type in the related IP address such as
Address, Subnet Mask
Enter the L2TP Account provided by your ISP for the L2TP
connection.
Enter the Password provided by your ISP for the L2TP
connection.
Re-enter the Password for confirmation.
Gateway IP address or domain name here. If you do not have a
L2TP gateway then enter the ISP's Gateway IP address above
or domain name.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you do not
wish to set a maximum packet size. (The default settings is
1460)
You can specify an idle time threshold (seconds) for the WAN
port. This means if no packets have been sent (no one using the
Internet) during this specified period, the router will automatically
disconnect the connection with your ISP.
Select the desired option:
Keep-alive (maintain connection)
The connection will never be disconnected by this device. If
disconnected by your ISP, the connection will be reestablished
immediately. (However, this does not ensure that your Internet
IP address will remain unchanged.)
Auto-Connect
An Internet connection is automatically made when required,
and disconnected when idle for the time period specified by the
"Maximum Idle Time (60~3600)".
Manual-on
You must manually establish and terminate the connection.
42
button to replace the WAN
Gateway.
and
IP
Advertisement
Table of Contents
