Table of Contents
Advertisement
Chapter 2 Quick Setup
The Wizard section is designed to get you using XRT-401F as quick as possible. In the Wizard, you
are required to fill in only the information necessary to access the Internet. Once you click on the
Wizard
in the web page, you should see the screen below.
Step 1) Host Settings
The Host Settings allows your router to set up Host name and Domain name, it also can set up its
Time Zone and Daylight Saving Time, these will affect functions such as Log entries and Firewall
settings.
Parameter
Host Name
Time Zone
Daylight Savings
Function Mode
In this setup wizard, we set it as Router mode
Note
NEXT
Click on
to proceed to the next page (step 2) WAN Settings.
This is optional. You can specify a Host name for XRT401F.
Select the time zone of the country where you currently are.
The router will set its time based on your selection.
The XRT-401F can also take Daylight savings into account. If you wish
to use this function, you must select the enable box to enable your
daylight saving configuration.
By default, XRT-401F is set as Router mode.
If set to Bridge mode will turn the Router into 5-port Ethernt Switch
where WAN port comes to Port # 5.
17
Description
Advertisement
Table of Contents
