Table of Contents
Advertisement
2.3 PPPoE
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameter
User Name
Password
Retype Password
Service Name
MTU
Maximum Idle Time
Enter the User Name provided by your ISP for the PPPoE
connection.
Enter the Password provided by your ISP for the PPPoE connection.
Re-enter the Password for confirmation.
This is optional. Enter the Service name should your ISP requires it,
otherwise leave it blank.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you do not wish
to set a maximum packet size. (The default settings is 1492)
You can specify an idle time threshold (seconds) for the WAN port.
This means if no packets have been sent (no one using the Internet)
during this specified period, the router will automatically disconnect
the connection with your ISP. (The default settings is 300 seconds)
21
Description
Advertisement
Table of Contents
