Chapter 3 Advance Features - Planet XRT-401F User Manual

Chapter 3 Advance Features

If you have already configured the Wizard, you do NOT need to configure anything for you to start
using the Internet.
Advance features that allow you to configure the router to meet your network's needs such as:
Firewall setup, Port Mapping, DMZ, Virtual Servers, QoS, and VLAN
Below is a general description of what advance functions are available for this broadband router.
Parameter
3.1 Admin
This section allows you to set XRT-401F's system settings, password and
Remote Management Administrator, it also allows you to check system
status and log, and provide you the configuration tools.
3.2 WAN
This section allows you to select the connection method in order
to establish a connection with your ISP (same as the Wizard section)
3.3 LAN
You can specify the LAN segment's IP address, subnet Mask,
enable/disable DHCP and select an IP range for your LAN, you also
can check DHCP client list in here.
3.4 NAT
You can configure the Virtual Server, Special Applications, Port Mapping,
ALG and DMZ functions in this section. This allows you to specify what
user/packet can pass your router's NAT.
3.5 Firewall
The Firewall section allows you to configure Firewall, Client Filtering, URL
Filtering and MAC Control.
3.6 Routing
You can configure Static Routing in this section, and check the concurrent
Routing Table.
3.7 QoS
You can assign the bandwidth for specific LAN / WAN port. Each LAN Port
will follow the bandwidth you assigned.
3.8 Other
You can configure UPnP and DDNS service in this section.
3.9 Status
You can check system information in here, including system status and
concurrent hardware information.
Select one of the above advance features selections and proceed to the manual's relevant
subsection.
option.
Description
25