Mac Filtering - Planet VR-300 Series User Manual

4.6.2 MAC Filtering

Entries in this table are used to restrict certain types of data packets from your local network or Internet
through the router. Use of such filters can be helpful in securing or restricting your local network as
shown in Figure 4-39.
Object
Enable MAC Filtering
Interface
MAC Address
Add
Remove
Remove All
Enterprise 5-Port 10/100/1000T VPN Security Router
Figure 4-39: MAC Filtering
Set the function as enable or disable.
When the function is enabled, the router will block traffic of the MAC
address on the list.
Select the function works on LAN, WAN or both. If you want to block
a LAN device's MAC address, please select LAN, vice versa.
Input a MAC address you want to control, such as
A8:F7:E0:00:06:62.
When you input a MAC address, please click the "Add" button to add
it into the list.
If you want to remove a MAC address from the list, please click on
the MAC address, and then click the "Remove" button to remove it.
If you want to remove all MAC addresses from the list, please click
the "Remove All" button to remove all.
- 92 -
Description
VR-300 series