Table of Contents
Advertisement
Parameter
VLAN Enable
Port VLAN Enable
PVID
Priority
WAN
1. Different VLAN will have different PVID. Those ports with the same PVID will still
see each other.
2. WAN should use different VID to LAN VID.
3. Due to the Router is a single port WAN Router, ONLY ONE WAN check box is
Note
allowed. By default, it is set on port 5.
4. This Router support port based VLAN at Router mode, yet at Bridge mode there
are two different VLAN types, port based and 802.1q tagged VLAN for choice
Default
Enable will turn on the port based VLAN.
Disable
[After enabled, the options will show up.]
The port joins to the WAN VLAN group. To disable will
Enabled
make the port isolated from the WAN.
1
The VLAN ID of the selected port.
1 for LAN 1 -4
2 for WAN at port 5
4
The priority of the selected port.
By default, the check box only enabled for port #5.
Disabled
Description
47
Advertisement
Table of Contents
