supply cable section: for cables of a maximum length of 20 metres (calculation base:
5A/mm²), must be checked and adapted depending on installation conditions
PFP
Voltage
11M 230V‐50Hz
electrical conduits must be secured,
use the stuffing box to bring the supply cable into the appliance.
Operation
2.1 The Control Panel
Symbol
Designation
water flow
Heating
external pump
(option)
ambient air
temperature
Default
"on/off" button
Button for displaying the temperature of the pool water or for setting
parameters
H03579‐03.A1.SA
Maximum current
consumption
A
15.5
Not flashing
Water flow is
correct
active
Refer to the manual of the optional feature
Sufficient
Ver. 11/2011
Cable section
mm²
3 x 2.5
3G2.5
phase (L) + neutral (N) + Earth (PE)
Flashing
Water flow to low or
no water flow
Starting up
insufficient
See §4
Electrical protection
A
16
Off
/
inactive
/
6