Technical Information; Technical Specifications; Warranties - Zodiac PW 5M Instructions For Installation And Use Manual

For swimming pool
Table of Contents

Advertisement

 The heat pump is giving off water: is this normal? 
Your  appliance  will  give  off  water  in  the  form  of  condensation.  This  water  is  the 
humidity  contained  in  the  air  which  condenses  on  contact  with  certain  cold 
components inside the heat pump.  
Caution: your appliance can drain several litres of water per day. 
 
 Where  should  my  water  treatment  system  be  positioned  with  respect  to  the 
heating system? 
The  water  treatment  system  (chlorinator,  salt  chlorinator,  etc...)  must  be  installed 
preferably  downstream  from  the  heat  pump  (see  installation  §1.3.3),  and  must  be 
compatible with the latter (check with the manufacturer). 
 
Technical information 
 
6.1 Technical specifications 
 
Single phase voltage
Power consumption*   
Power restored* 
Nominal current consumption*
Sound power 
Sound pressure at 10 meters
Protection calibre 
* with an ambient air of +15 °C and a pool water of 24 °C, humidity 70% 
 unit protection class: IP 24 
 refrigerant gas: R410A  
 refrigerant charge: see product information plate 
 
Warranties 
 
Principle 
Unless  otherwise  stipulated,  we  contractually  guarantee  the  correct  operation  of  our 
new  Products.  We  guarantee  that  our  Products  conform  to  their  technical 
specifications and that they are free of material and manufacturing default. 
The present warranty is limited, at our discretion, either to the repair or exchange for a 
new  or  repacked  Product,  or  to  the  refund  of  any  Products  recognized  as  being 
defective  by  our  services.  Shipping  expenses  for  the  repaired  or  replaced  Products 
delivered  to  the  client  will  be  borne  by  us.  The  guarantee  excludes  any  labour  costs, 
travel and/or accommodation expenses incurred as the result of repairs made outside 
of continental France and excludes any payment of damages.  
All  Product  returns  must  first  be  approved  and  determined  by  our  services.  Returns 
sent by the Client without our prior approval will not be accepted. 
H03579‐03.A1.SA 
PW 
COP* 
Ver. 11/2011 
5M
kW
0.98
kW
4.65
A
4.45
4.7
dBA
65.4
dBA
37.4
A
7M
9M 
11M 
230V‐50Hz 
1.56
2.06 
6.52
8.6 
10.5 
7.09
9.36 
12.4 
4.2
4.2 
66.7
69 
38.7
41 
16
2.6 
4.1 
72 
44 
12 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents