I Operation - Zodiac PX50 MD12 Instructions For Installation And Use Manual

Description
"HEATING" mode
"COOLING" mode
"HEATING & COOLING"
mode
"BOOST" mode
"SMART" mode
"SILENCE" mode
Alarm
Padlock
"TIMER" ON
"TIMER" OFF
°C °F
Celsius/Fahrenheit

2.3 I Operation

• Check that there are no tools or other foreign objects in the machine,
• Refit the panel providing access to the technical part (see § "5.3 I Dimensions and marking"),
• Set the valves as follows: valve B wide open, valves A, C, D and E closed.
• An incorrect by-pass setting may cause the heat pump to malfunction.
• Check that the hydraulic connections are correctly tightened and that there are no leaks.
• Check that the appliance is stable.
• Turn on the water flow (by activating filtration).
• Close valve B gradually so that the filter pressure is increased by 150g (0.150 bars).
• Open valves A, C and D fully then valve E by half (the air which has built up in the heat pump condenser and the
filtration circuit will bleed out). If valves D and E are not present, open valve A wide and close valve C by half.
• Connect the power supply to the heat pump.
• The heat pump is on standby.
• Press .
• Set the desired temperature (called the "temperature setpoint" ) (see § "2.4.2 Changing operating mode").
16
Steady Flashing
Operating in "HEATING"
mode
Operating in "COOL-
ING" mode
Operating in "HEATING
& COOLING" mode
"BOOST" mode Operating at full power
activated in "SMART" mode
Operating at medium
"SMART" mode
power in "SILENCE"
activated
mode
"SILENCE" mode
activated
Alarm enabled
Keypad locked
Configuration in
progress
Configuration in
progress
Selected temperature
unit
: Water inlet valve
: By-pass valve
: Water outlet valve
: Water inlet adjustment valve (optional)
: Water outlet adjustment valve (optional)
Off
/ Disabled
/ Disabled
/ Disabled
Disabled
Disabled
/ Disabled
/ Disabled
/ Disabled
/ Disabled
/ Disabled
/ Disabled