Xyz Tip Offset Calibration - Stratasys Fortus 450mc User Manual

XYZ Tip Offset Calibration

Pressing the XYZ Tip Offset Calibration button will open a page which allows you to initiate
an XYZ Tip Offset Calibration and/or build a calibration part. See "XYZ Tip Offset
Calibration" on page 184 for detailed instructions.
An XYZ Tip Offset Calibration must be performed each time the printer's tips are changed.
Although the Tip Change Wizard provides instructions for performing this calibration
directly within the wizard, the XYZ Tip Offset Calibration can be performed outside of the
Tip Change Wizard using this button.
Figure 4-36: XYZ Tip Offset Calibration Page
81