Supero SUPERSERVER 6017R-WRF User Manual page 104

Table of Contents

Advertisement

SUPERSERVER 6017R-WRF/NTF USER'S MANUAL
South Bridge Confi guration
This feature allows the user to confi gure the settings for the Intel PCH chip.
PCH Information
This feature displays the following PCH information.
Name:
This item displays the name of the PCH chip.
Stepping:
This item displays the status of PCH stepping.
USB Devices:
This item displays the USB devices detected by the BIOS.
All USB Devices
This feature enables all USB ports/devices. The options are Disabled and Enabled.
(If set to Enabled, EHCI Controller 1 and Controller 2 will appear.)
EHCI Controller 1/EHCI Controller 2 (Available when All USB Devices are
set to Enabled)
Select Enabled to enable EHCI (Enhanced Host Controller Interface) Controller 1
or Controller 2. The options are Disabled and Enabled.
Legacy USB Support (Available when USB Functions is not Disabled)
Select Enabled to support legacy USB devices. Select Auto to disable legacy
support if USB devices are not present. Select Disable to have USB devices
available for EFI (Extensive Firmware Interface) applications only. The settings are
Disabled, Enabled and Auto.
Port 60/64 Emulation
Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB
keyboard so that it can be fully supported by the operating systems that does not
recognize a USB device. The options are Disabled and Enabled.
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When enabled, EHCI ownership change will be claimed
by the EHCI driver. The options are Disabled and Enabled.
7-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 6017r-ntf

Table of Contents