Table of Contents
Advertisement
1-1
Overview
The SuperServer 6017R-WRF/NTF is a high-end server comprised of two main
subsystems: the SC815TQ-R700WB/600WB 1U server chassis and the X9DRW-iF
dual processor serverboard. Please refer to our web site for information on operating
systems that have been certifi ed for use with the system (www.supermicro.com).
In addition to the serverboard and chassis, various hardware components have been
included with the SuperServer 6017R-WRF/NTF, as listed below:
•
Heatsinks:
One (1) 1U Passive CPU Heatsinks (SNK-P0047PSC)
One (1) 1U Passive CPU Heatsinks (SNK-P0047PS)
•
One (1) SC815/113/116 Intel DP X9, X8 PC air shroud (MCP-310-19002-0N)
(6017R-WRF only)
•
One (1) SC815/113/116 Intel DP X9, X8 PC air shroud (MCP-310-19001-0N)
(6017R-NTF only)
•
Fans:
Four (4) 40x56mm 4-pin PWM chassis middle fans (FAN-0086L4)
One (1) 40x56mm 4-pin PWM chassis middle fan (MCP-340-00022-0N)
•
One (1) 70-cm round 20-to-20-pin Front Panel Control Cable (CBL-0335L)
•
SAS/SATA Accessories
One (1) SAS/SATA backplane (BPN-SAS-815TQ-O-P)
One (1) 30AWG 76/66/54/45-cm, w/66-cm AOC connection cable
(CBL-0343L-01) (6017R-WRF only)
One (1) 30AWG 64/54/44/34-cm, w/64-cm SATA connection cable
(CBL-0188L-02) (6017R-NTF only)
Four (4) hot-swap 3.5" hard-disk drive trays (MCP-220-00075-0B)
•
One (1) Riser Card (RSC-R1UW-2E16-O-P)
•
Rail Kit sets:
One (1) set outer rail (screw) for 1U chassis (MCP-290-00101-0N)
One (1) set Inner rail, front (screw) for 1U chassis (MCP-290-00105-0N)
One (1) set Inner rail, extension (screw) for 1U chassis (MCP-290-00109-0N)
Chapter 1
Introduction
1-1
Chapter 1: Introduction
Advertisement
Table of Contents
