Event Logs - Supero SUPERSERVER 6017R-WRF User Manual

SUPERSERVER 6017R-WRF/NTF USER'S MANUAL
NIC Confi guration
Link Speed
This item allows the user to set the link speed for your network connections.
The Options are AutoNeg (Auto Negotiation), 10 Mbps Half, 10 Mbps Full, 100
Mbps Half, and 10 Mbps Full.
Wake On LAN (WOL)
Select Enabled to wake up the system with a device (a magic packet). The
options are Disabled and Enabled.
Blink LEDs (Range 0~15 seconds)
This item sets the duration of blinking for NIC LEDs. The range of duration is from
0 second to 15 seconds. The default setting is 0 second.
Port Confi guration Information
This menu displays the following information for a NIC port specifi ed.
•
UEFI Driver
•
Adapter PBA
•
Chip Type
•
PCI Device ID
•
PCI Bus: Device: Function:
•
Link Status: This item displays the link status of network connections.
•
Factory MAC Address
•
Alternate MAC Address
7-4

Event Logs

Use this feature to confi gure Event Log settings.

Change SMBIOS Event Log Settings
This feature allows the user to confi gure SMBIOS Event settings.
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable SMBIOS (System Management BIOS) Event Logging
during system boot. The options are Enabled and Disabled.
7-22