Table of Contents
Advertisement
3.
In the APN name field, enter the APN that you wish to use for the mobile broadband connection.
4.
(Optional) In the Service name field, enter a name that allows you to easily identify the connection.
5.
Click the Save button to confirm the settings.
6.
Click the Status menu item from the top menu bar to see the transparent bridging status.
7.
Next you must configure your downstream device connected via Ethernet to the NTC-6200 Series router to initiate a
network connection through a PPPoE client. The username and password used by the downstream device for the PPPoE
session will be passed on and used by the NTC-6200 Series router as the packet data (PDP) context authentication
settings.
www.netcommwireless.com
Figure 22 - Transparent bridge mode status
NetComm Wireless 3G M2M Router / Plus
27
Advertisement
Table of Contents
