Table of Contents
Advertisement
Sleep settings
Use the Sleep mode drop down list to select a condition under which the router should enter the sleep state.
Sleep by manual trigger only
When this mode is selected, the router will only enter the sleep state when the Trigger sleep mode now button is pressed. The
Trigger sleep mode now button is not available unless Low power functionality has been selected and the setting saved.
Sleep after specified duration and ignore ignition pin
When this mode is selected, the router goes to sleep after the specified time period regardless of the state of the ignition pin.
Enter the time in seconds to wait before entering sleep state in the Always go to sleep this many seconds after booting field. A
setting of 0 means that the router will never enter sleep state.
Sleep triggered by ignition pin status
This mode sets the router to enter sleep state when the signal on the ignition pin reaches the specified value.
Use the Sleep when ignition pin goes setting to select Low or High. By default, this is set to Low.
Sleep after specified duration or triggered by ignition pin
This option sets the router to go to the sleep state on one of two conditions, depending on which condition is reached first. These
conditions are based on the state of the ignition pin and a timer. For example, based on the configuration in the screenshot below,
the router will go to sleep state when the ignition pin goes low or after 3600 seconds (1 hour), depending on which condition occurs
first.
NetComm Wireless 3G M2M Router / Plus
84
Figure 90 - Sleep by manual trigger only
Figure 91 - Sleep after specified duration and ignore ignition pin
Figure 92 - Sleep triggered by ignition pin status
Figure 93 - Sleep after specified duration or triggered by ignition pin
www.netcommwireless.com
Advertisement
Table of Contents
