6.
Repeat steps 4 and 5 for the main system firmware image.
7.
The uploaded firmware images are listed in the Uploaded files section. Click the Install link next to the recovery image to
begin installing the recovery firmware image and then click OK on the confirmation window that appears.
8.
The recovery firmware image is flashed and when it is complete, the router displays "The firmware update was successful"
and returns to the main Upload screen.
NetComm Wireless 3G M2M Router / Plus
108
Figure 109 - File upload
Figure 110 - Uploaded files
Figure 111 - Recovery firmware flash process
www.netcommwireless.com