Installation; Technical Information For The Installer - Elba P60 Instructions For The Use - Installation Advices

4
TECHNICAL INFORMATION
FOR THE INSTALLER
In order to install the cooker top into the
kitchen fixture, a hole with the dimen-
sions shown in fig. 4.2 has to be made,
bearing in mind the following:
within the unit, between the bottom
of the cooktop and the upper surface
of a shelf there must be a clearance
of at least 30 mm.
It is absolutely essential that you
place a separator between the base
of the cooktop and the built-in unit or
the oven;
the cooker top must be kept no less
than 100 mm away from any side wall
(fig. 4.2);
the hob
installed at least 60
mm from the wall;
there must
distance of at least 650
mm between the hob
and any wall cupboard
or extractor
positioned immediately
above (see fig. 4.1);
if the hob is installed
over a built-in oven,
there must be a dis-
tance of at least 30 mm
between the two appliances.
INSTALLATION IN KITCHEN
CABINET WITH DOOR
It is recommended that a 30 mm clear-
ance be left between the cooker top and
the fixture surface (fig. 4.3).
12

INSTALLATION

must be
be a
hood
(fig. 4.3)
Clearance
Door
Space for
connections
Fig. 4.1
Fig. 4.2
Fig. 4.3