Lens Lock; Using The Automatic Adjustment Feature - Hitachi CP-X9110 User Manual

Operating
Adjusting the lens (continued)

Lens lock

Using the LOCK buttons turns on/off the lens lock
feature. When ON is selected, the buttons (ZOOM,
ZOOM + / -, FOCUS + / -, LENS SHIFT,
LENS MEMORY) are locked.

Using the automatic adjustment feature

1.
Press AUTO button on the remote control.
Pressing this button performs the following.
 For a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its
maximum size prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
 For a video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (
horizontal position will be automatically set to the default.
For a component video signal

The vertical position and horizontal position will be automatically set to the default.
The horizontal phase will be automatically adjusted.
NOTE
• The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input.
• When this function is performed for a video signal, a certain extra such as a line
may appear outside a picture.
• When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the computer model.
• The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (
32
LOCK
button
62
). The vertical position and
AUTO
button
84
).