Lens Memory - Hitachi CP-X9110 User Manual

Adjusting the lens (continued)

Lens memory

This projector is equipped with memory functions for
the lens adjustments (ZOOM, FOCUS, LENS SHIFT
and LENS TYPE). Up to 3 sets of adjustments can be
stored.
To utilize the lens memory feature, press the LOAD or
FUNCTION button while the LENS SHIFT dialog is dis-
played, or press ▲ button while the ZOOM or FOCUS
dialog is displayed. Then the LENS MEMORY dialog will
appear. The current lens adjustments are displayed on
the "CURRENT" line. The adjustments already stored
in the lens memory are displayed on the lines of SAVE
and LOAD-1 to 3.
 SAVE:
To utilize the save lens memory feature,
press the ► button while CURRENT is
selected on LENS MEMORY dialog or press
the SAVE button on the remote control.
store the current lens adjustments, select one
of the "SAVE" options numbered 1 to 3 (number of the lens memory) and press the
►or ENTER button, while LENS MEMORY OSD is displayed.
Remember that the current data being stored of a memory will be lost by saving
new data into the memory.
 LOAD:
To recall stored adjustments, select one of the "LOAD" options numbered 1 to
3 (number of the lens memory) and press the ►or ENTER button, while LENS
MEMORY OSD is displayed.
Remember that the current adjusted condition will be lost by loading data. If you
want to keep the current adjustment, please save it before performing a LOAD
function.
 CLEAR LENS MEMORY:
To clear the adjustment stored in a lens memory, select CLEAR LENS MEMORY
and press the ►or ENTER button, while LENS MEMORY OSD is displayed. Press
the ►button. A message dialog is displayed for confirmation. Press the ►button
again to clear all of the lens memory.
NOTE • The projector may ignore operation by buttons while moving the lens.
SHUTTER
To
Operating
FUNCTION
button
LENS
MEMORY
button
31