Fastening The Cables - Hitachi CP-X9110 User Manual

Setting up
Connecting with your devices (continued)
Monitor
NOTE
• To use a wired remote control, connect a wired remote control to the
REMOTE CONROL IN port. You can also connect another projector to the
REMOTE CONROL OUT port to control it from the wired remote control. You
can utilize this projector as a remote control-relay with the REMOTE CONROL
IN and OUT ports. To connect the wired remote control or another projector
to the REMOTE CONTROL IN or OUT ports, use audio cables with 3.5 mm
diameter stereo mini plugs. This function is useful when a wireless remote
signal may not reliably reach the projector.

Fastening the cables

Use the supplied cable tie
to fasten the cables.
CAUTION
metallic tie may cause damage to the cables and tie holder.
►Do not bind the cables too tightly. The cables or the hole might be damaged.
14
►Use only a plastic tie to get together or fasten the cables. A
(Wired)
Remote
control
Holes for
Cable tie
Another
projector
Holes for
Cable tie
Cable tie